Industries

Electronics

Roller coverings for the electronics industry

The electronics industry relies on demanding manufacturing and treatment processes, where rollers may be exposed to both mechanical stresses and specific chemical environments.

On continuous surface treatment lines in particular, rollers are used at different stages of the process and may be exposed to cleaning, pickling, electrolytic treatment or rinsing baths. ENRI adapts the choice of elastomer and the covering configuration according to the roller’s function, the substances it comes into contact with and its actual operating conditions.

Technical rubber compounds, zoned or multi-band coverings, new rollers or recovering: our solutions are defined according to each application to meet requirements for precision, resistance and equipment durability.

For more information, read the ENRI article:

Rollers for the Electronics Industry: Which Coverings for Chemically Demanding Environments?

FAQ – Secteur Électronique

There is no single covering suited to every application. The choice depends on the function of the roller, the chemicals it is exposed to, the operating conditions and the mechanical loads involved. ENRI selects the elastomer and defines the covering according to the actual working environment of the roller.

On some surface treatment lines, rollers are exposed to products used during cleaning, pickling, electroplating or rinsing. ENRI uses nitrile rubber (NBR) coverings in particular, along with other rubber grades selected according to the chemical and mechanical constraints of the application.

Yes. Rollers can be used on reel-to-reel lines processing metal strip in copper, copper alloys, steel, stainless steel or aluminium. The covering is defined according to the position and function of the roller on the line, as well as its environment.

Yes. ENRI produces zoned or multi-band coverings when the application does not require a uniform covering across the full width. The width, position and number of bands can be adapted to the geometry of the roller and to its function within the equipment.

Wear of the covering, a loss of grip or glazing can indicate that re-covering is needed. When the roller body can be kept, ENRI can strip the old covering and apply a new one suited to the application. New rollers can also be manufactured from a drawing or a technical specification.

Appeler Email